Samples of
tungsten-modified borated zirconium were prepared to be used as catalyst in
2-phenoxyethanol acetylation. The borated zirconias were obtained by
impregnation of two zirconias (S2 and S4) obtained by the micellar method using
different zirconium precursor concentrations with boric acid solution
containing 0.3 moles B/dm3. These solids
and the parent zirconias were impregnated with two concentration levels of ammonium metatungstate solutions (0.11 and 0.22 moles W/dm3). The solids containing boron mainly have amorphous
characteristics and strong acidity, while those that contain only tungsten
showed stronger acidity and evidence of the presence of a crystalline phase.
The specific surface area and the pore volume slightly decreased in the solids obtained by adding tungsten to borated zirconia, and more markedly in those that contain only tungsten, and the mean pore size increased with respect to the parent support. It was observed that in the 2-phenoxyethanol acetylation using acetic acid as acylating agent and tungsten-modified borated zirconia as catalyst, the yield to acetylated product was high and it is correlated with the acid strength of the catalysts. In turn, the solids that contain only tungsten have a correlation with the acidity, but lead to low yield values due to a poorer dispersion of the tungsten species. The best yield was obtained with the catalyst prepared with the borated S4 zirconia containing 15% g B2O3/100 g support and 12.5% g W/100 g support. Using this catalyst and the same reaction conditions, the acetylation of different alcohols and phenols was studied, the reactivity order being as follows: primary alcohols > secondary alcohols > phenols.
The specific surface area and the pore volume slightly decreased in the solids obtained by adding tungsten to borated zirconia, and more markedly in those that contain only tungsten, and the mean pore size increased with respect to the parent support. It was observed that in the 2-phenoxyethanol acetylation using acetic acid as acylating agent and tungsten-modified borated zirconia as catalyst, the yield to acetylated product was high and it is correlated with the acid strength of the catalysts. In turn, the solids that contain only tungsten have a correlation with the acidity, but lead to low yield values due to a poorer dispersion of the tungsten species. The best yield was obtained with the catalyst prepared with the borated S4 zirconia containing 15% g B2O3/100 g support and 12.5% g W/100 g support. Using this catalyst and the same reaction conditions, the acetylation of different alcohols and phenols was studied, the reactivity order being as follows: primary alcohols > secondary alcohols > phenols.
Chinatugnten Online Tel:86-592-512-9696
Fax:86-592-512-9797 Email:sales@chinatungsten.com
没有评论:
发表评论